Description
Genuine Mercedes / Mopar Interior Grab Handle for a T1N 2001-2006 Dodge Sprinter Vans
T1n Sprinter passenger side grab handle kit. Fits 2001 – 2006 Dodge, Freightliner & Mercedes Sprinter above passenger side front door. All parts needed to install grab handle over passenger side door included. Installation is easy. Pull the rubber seal down above the door to allow access behind the headliner. Pop out the plastic plugs in the headliner and slip the metal bracket in place. Reinstall the headliner rubber trim and then screw the grab handle in place. Check out our over the head, headliner Click here
This Comes with Genuine Mopar/Mercedes Metal Backing Mounting Plate and 2 mounting Screws.
First pull the door seal down. The pillar cover removes easy with just a jerk. Next remove the torx screws that hold the foam support for the pillar cover. You will also need to remove the passenger side visor bracket closest to the door.
The headliner should now be loose enough to install the handle bracket behind it. All that will protrude out is the dogears that clip to the holes. The bracket can be installed upside down, so make sure it fits correctly before reassembly.
The handle can now be screwed to the bracket. You can also install this bracket on the driver’s side, but the holes are not cut. You can measure and cut carefully if you are handy enough.
Usually ships by next business day. Please allow an additional 1-5 business days for delivery to most US locations.
Covered by Mercedes Parts Warranty, Click here for information
000-826-06-71
Reviews
There are no reviews yet.