Description

FW601 CRL T-Vent Driver Side Window for your 2002-2006 Sprinter Van 

• High Roof and Low Roof Models
• Short or Long Wheel Base
• 30 Day Warranty
• Does not include Screen

CRL windows are configured to fit within the 02-06 Sprinter Vans OEM stamping and provide a customized OEM look. This great feature eliminates the time-consuming efforts of laying out where the window will be installed. Just line it up to cut, starting on the upper inner dimple, and follow along with the OEM stamping. T-Vent has a T-Handle to open the glass like a canopy to allow airflow, Vent has a screen-less design. Solar Privacy Tint Glass

Local Pick up Pays $50 Shipping Charge. We install Windows Locally in the Portland Oregon Area. Contact us for Package Deal Estimates.

Note: Will ship within 5 business days.

Looking for a vented camper window for an older Sprinter van? This CRL Sprinter Windows 140”/158″WB Driver’s Side Forward T-Vent Window (FW601) fits the factory window cutouts on both short- and long-wheelbase 2002-2006 Mercedes Sprinter vans. This great feature eliminates the time-consuming efforts of laying out where the window will be installed.

This window will bring light into your van through the large fixed upper windowpane, and airflow through the bottom opening panel (the opening panel is unscreened).

Key Features: CRL Sprinter Windows 140”/158″WB Driver’s Side Forward T-Vent Window (FW601)

This CRL Mercedes Sprinter 140″/158”WB Driver’s Side Forward T-Vent (FW601) Window:

• Fits 2002-2006 Mercedes Sprinter 140″/158″WB models
• Has a lift-out vented panel at the bottom of the window (unscreened)
• Has 28% dark gray factory tint
• Uses tempered glass for maximum safety and strength
• Is tested to ANSI Z26.1 and FMVSS 205 safety standards
• Uses factory stampings for cut lines
• Is manufactured in the USA by CR Laurence.
• Requires foam gasket seal tape for proper sealing.

When mounting these windows in your Mercedes Sprinter van:

• If you can, cut the openings with a center-blade shear, rather than a jigsaw – this will cut an opening that may be less ragged, produce less debris, and produce less hammering on the sheet metal of the van.
• Make sure you paint the cut edges of the new window opening – if you skip this step, moisture can rust out the edges of the window mounting.
• IMPORTANT: these windows clamp in place – ensure you do not use power tools on the inner trim ring screws, use hand tools to tighten these.

 

Specifications: CRL Sprinter Windows 140”/158″WB Driver’s Side Forward T-Vent Window (FW601)

Height (in.):	24.5″
Width (in.):	42.5″
Weight (lbs.):	30
Tint:	28% Dark Gray
Window Type:	Vented (Clamp-in)