T1N 2001-2006 Sprinter Van Itasca Navion RV Motorhome Airbag Replacement Kit

Original price was: $449.44.Current price is: $379.95.

 Tax Included Pricing

We have airbag different airbag kit/replacements for various

T1N RV’s Contact Us for fitment confirmation

SKU: TX3-Navion-Airbagkit Category: Tags: , ,


Itasca Navion RV Motorhome & Upgraded Winnebego View Sprinter Van Airbag Replacement Kit


  • New airline hose ~30ft
  • New Schrader Elbow (2) 
  • Air fill valves (2)
  • Straight connectors (2)
  • Mounting Bolts (4)
  • Washers and Lock Washers (4ea)
  • 1 shrader valve mouting bracket holder
  • Not all items sent with kit might not be needed, but nice to have spares if you don’t utilize.


With the System Air kit you can replace your airbags and then you will be able to adjust your motorhome suspension for the subtle changes that occur after the rear springs take a set.  If you are too heavy on one side, the air pressure can be increased to make it sit level from side to side.

This T1N System Air Suspension was designed and patented to assist rear leaf spring suspension systems on pick-up trucks, vans and motorhomes up to 25,000 GVWR. The unique features of this product are that it allows an owner to maintain side to side trim, reduces rear sagging to keep the coach level AND improves the ride and handling at the same time.  That’s a lot!

This 2001-2006 T1N RV / Motorhome Itasca Navion, or Winnebago View system mounts on the spring, therefore allowing the air to work with the spring rather than sitting on the axle and taking away from the spring. There are air lines to both wheel wells so that you can maintain independent air pressure control.  System Air wasn’t designed as a lift kit but to keep a unit level side to side, or front to rear. This will enhance the spring’s capability up to 1800 pounds per side.

And talk about handling–less freeway hop, easier steering, better lane change control.  Makes riding in the rear more comfortable than riding up front!

For owners of older coaches equipped with Mor/Ryde tag axles, no more sagging rear end!  The System Air was designed to make the Mor/Ryde perform better.  If you eliminate the sag, you decrease roll and sway on the road.

A level vehicle is a safer vehicle.  If the vehicle is sagging to the rear, you may need to carry a higher air pressure to get your springs back to normal.  Later, you can readjust for a smooth ride.  It may require up to 500 miles of driving until you can see that your RV is level.  There is no maintenance on the System Air–just check the air pressure when you check your tire air pressure.

The Airbag Kit does not replace any part of your present suspension system.  It is an additional replacement component, installed between the frame and rear spring of the RV Motorhome T1N Sprinter Van Itasca and Some models of the Winnebago View.



Additional information

Weight 10 lbs
Dimensions 12 × 12 × 6 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…