Insert the BumpStepXL into the 2″ receiver hitch on your T1N 2001-2006 Sprinter Van at the most desirable position. Then install the hardware and securely tighten the bolt. The secure mounting design holds the BumpStepXL firmly inside the T1N’s receiver to reduce flexing and movement. There are four possible mounting positions to allow for proper installation depth on virtually all T1N Sprinter receivers.
Note: If your T1N BumpStep has been involved in an impact or accident it is important to have it inspected for cracks or fractures prior to placing any weight or loads upon it. Please send it to WeatherTech, BumpStep Inspection, 1 MacNeil Court, Bolingbrook, IL 60440 and we will be happy to inspect it and advise you if it needs to be replaced.
Need Printable Rear Bumper Step Installation Instructions for your 2001-2006 T1N Sprinter Van? Click Here